Lighting Adhesive Vents

Confined car headlights have obvious temperature difference changes before and after work, which causes condensation and fogging inside the headlights. Moreover, changes in temperature differences can cause pressure differential imbalances, and long-term stress accumulation can easily damage the car headlights. Sealing performance reduces the lighting effect and service life of the headlights.

SR Lighting Adhesive Vents has waterproof and breathable functions. Installing our breathable membrane can effectively allow air and water vapor to pass, balance the internal and external pressure difference, avoid stress accumulation, and at the same time block the intrusion of water, dust and oil, and reliably guarantee the car The integrity of the headlights is sealed, and the protection level can reach IP66 / IP68, which greatly improves the service life of the car's headlights and makes the headlights work in any environment.

SR Lighting Adhesive Vents is divided into 100% pure ePTFE film and film laminated with non-woven substrate

100% pure ePTFE breathable membrane is divided into gray and white

Non-woven fabric covered with ePTFE membrane is available in white, black, red, blue and purple for your choice

We choose acrylic or silicone double-sided tape as the fixing method of our breathable film to meet the application in different environments.

 

 

We can provide typical die cut size of below and also provide customized sizes of the Taillight Vents

Sinceriend is a technology-focused materials science company whose passion for performance drives real-world change.

 

 

Waterproof and dustproof: effectively isolate harmful substances such as external moisture and dust from entering the lamp to prevent damage to internal components.
Improve the performance of car lights: avoid excessive water vapor inside the lamp, ensure the brightness and clarity of the light source, and improve driving safety.
Extend the life of car lights: reduce damage to the lamp caused by moisture, corrosion and other problems, and extend its service life.

 

 

Car headlights

Tail lights

Rear view mirror

Turn signal

Fog lamps

The LED street lamp

Project-light lamp

Landscape lamp

 

Installation
Lighting Adhesive Vents are usually installed on the back cover or side of the headlight, and are fixed by pasting or embedding. During the installation process, ensure that the breathable membrane is well sealed with the headlight housing to avoid gaps, otherwise it may cause the waterproof performance to deteriorate.

 

Precautions
During use, avoid scratching the breathable membrane with sharp objects. Because once the breathable membrane is scratched, its waterproof and dustproof functions will be affected. At the same time, check the status of the breathable membrane regularly. If the breathable membrane is found to be blocked or damaged, it needs to be replaced in time.

 

 

Check the integrity of the membrane regularly:
The owner needs to check the status of the breathable membrane regularly to ensure that it is not damaged or detached. If the breathable membrane is found to be damaged, it should be replaced or repaired in time.
Clean the vents:
The function of the breathable membrane depends on the normal function of the vents, so the owner should clean the vents regularly to prevent the openings from being blocked by dirt or moisture.
Prevent excessive water accumulation:
Although the breathable membrane can effectively prevent moisture from entering, if water or frost has accumulated inside the headlight, it may mean that the breathable membrane is improperly installed or damaged, and needs to be checked and repaired in time.
Avoid high temperature exposure:
The breathable membrane may age or lose its breathability effect if it is exposed to strong sunlight or high temperature for a long time. Therefore, it is recommended to avoid long-term high temperature exposure, especially in extreme tropical climates.