M12 Vent Plug

M12 Vent Plug is a vent plug with M12 threads that is often used in electrical or industrial applications to manage internal pressure while keeping the enclosure sealed. M12 is the thread size (12 mm diameter) that is often used in various connectors and accessories, such as vent plugs. These plugs are intended to allow air exchange or pressure equalization between the enclosure's interior and the outside environment while preventing contaminants such as dust, dirt, or water from entering.

1. High protection performance: It can provide IP68/IP69K level protection, making it appropriate for usage in harsh settings such as high-pressure water jets or complete immersion in water.
2. Breathable performance: The ePTFE (expanded polytetrafluoroethylene) material is waterproof and breathable, allowing air to circulate while keeping water and dust out.
3. Temperature adaptability: Because of its wide operating temperature range, it can be used in a variety of climates and environments.
4. Quick installation: The screw thread design enables installation and removal faster and easier.
5. Compatibility: The M12 Vent Plug design complies with a wide range of industrial standards and can be used in a variety of applications.
 

1.Vent in high airflow to balance the pressure between outside and inside of the enclosure and lower down the strain for the housingBenefit for Outdoor Equipment

2.Inserting the oleophobic and hydrophobic membrane into the PP body to make it chemically inert and UV resistant.

3.It is easy to install which is just to screw into the housing, and with the silica sealing ring at the opening to ensure the air tightness

4.Evidently reduces fog and condensation

5.The e-PTFE membrane can stop the salt crystal and vapor permeability to make it a long service life and free from breakdown or maintenance even under harsh working environment

1. Regular inspection: To keep the M12 Vent Plug functioning and performing properly, check it for dust or dirt blocking and clean it as needed.
2. Gentle cleaning: Using a soft cloth or brush, gently remove dust and debris surrounding the M12 Vent Plug; avoid using water or liquid detergents to keep liquid from entering the device.
3. Avoid using corrosive chemicals: Corrosive chemicals can damage the M12 Vent Plug material during the cleaning process.
4. Natural drying: After cleaning, place the M12 Vent Plug in a well-ventilated area to dry naturally. Avoid direct sunlight or heat sources to prevent distortion or damage to the M12 Vent Plug material.
 

It can be applied to LED , automotive electronics, packaging container, communications equipment, Industrial design solar equipment, and all kinds of outdoor sealed component for protective waterproof purpose.