How to keep a Waterproof vent warm

In fact, the placement of the Waterproof vent has a lot to do with the thermal insulation performance, because there are many valves with different functions on both sides of the Waterproof vent, such as ventilation valves and sealing valves, etc., so if the thermal insulation layer is placed on the Waterproof vent If the waterproof layer and the structural layer are in the middle, and the waterproof layer is at the bottom, this is a common insulation method, and it is also the common method of placing Waterproof vent insulation. Most of the Waterproof vents can be placed on such an insulation layer.

There is also an upside-down thermal insulation method. The thermal insulation layer is placed on the Waterproof vent, with the structural layer on top, followed by the waterproof layer and the thermal insulation layer. This thermal insulation method has higher requirements for the thermal insulation layer, and its material is required. The water absorption rate is low and the pressure resistance is high enough to keep it working and using at higher temperatures.

There is also a composite structure of the insulation layer of the Waterproof vent, so that the design can effectively reduce the construction procedures and production costs, and the material utilization rate is higher, but the industrial level is high. Another is to integrate the structural layer and the insulation material. This can simplify the construction, but the bearing capacity of such materials is relatively poor, and the durability is also poor, so this kind of use is not common.