Cleaning and maintenance of LED vents

1. Importance of regular cleaning:
Regular cleaning of LED equipment is an important step to ensure its normal operation. Dust, dirt and dust will accumulate on LED lamp beads and radiators, reducing heat dissipation efficiency and affecting light transmission.
2. Cleaning steps:
Use a soft, clean cloth to gently wipe the surface of the LED lamp beads and radiator to ensure that they are not damaged.
For dirty surfaces, you can use warm water to gently wipe. Be careful not to use too much water to prevent water from entering the inside of the device.
Avoid using chemical cleaners as they may damage the surface of the LED.
3. Heat dissipation and ventilation:
Ensure adequate ventilation so that air can flow through the LED device and take away heat.
For UVLED curing equipment, it is recommended to regularly check whether the vents are smooth every week or every two weeks and clean the vents.
4. Cleaning cycle:
For duct machines, it is generally recommended to clean the duct system after one year of continuous use.
If the ventilation system is used in a special environment, such as an environment with a lot of oil smoke, dust, etc., then the cleaning cycle of the duct machine should be shortened in time.
5. Observe the ventilation effect:
When you find that the indoor ventilation effect has deteriorated, or even feel that the ventilator makes strange noises when working, it means that the inside of the duct machine needs to be cleaned.
6. Professional cleaning service:
If you are not familiar with the internal structure of the machine, it is recommended to ask a professional service company to clean it to ensure the safety and reliability of the cleaning process.